Hydrogen Peroxide-Enabled High-Quality Transition Interface for Top-Gated Molybdenum Disulfide Field-Effect Transistors

초록

Two-dimensional (2D) transition-metal dichalcogenides are promising channel materials, but integrating ultrathin high-k gate dielectrics remains challenging because their surfaces lack dangling bonds. Atomic layer deposition (ALD) enables conformal dielectric growth on these 2D materials, with oxidant selection introducing a trade-off between water (H2O), which yields poor nucleation, and ozone (O-3), which affords uniform coverage at the expense of interface/channel degradation via oxygen substitution. Here, we demonstrate that hydrogen peroxide (H2O2)-driven ALD of high-k oxides yields uniform dielectric coverage while minimizing performance degradation by controlling Mo-sulfate formation at the interface on molybdenum disulfide (MoS2). This chemistry offers nucleation sites while preserving the 2D channel integrity through S-O interfacial bonding. Top-gated MoS2 field-effect transistors (FETs) with H2O2-based ALD hafnium oxide (HfO2) gate dielectrics achieve steep subthreshold slopes (similar to 70 mV/dec), low hysteresis (similar to 42 mV), and an equivalent oxide thickness (EOT) of similar to 0.9 nm. Benchmarking shows that these devices exhibit improved performance compared with previously reported single-dielectric top-gated MoS2 FETs. These findings establish H2O2-driven ALD of a high-k dielectric as a promising approach for complementary metal-oxide-semiconductor (CMOS)-compatible 2D gate stacks and suggest that robust S-O interfacial bonding can enable 3D-integrated, low-power device operation.

키워드