Optimization of hot pressed n-type SbI3-doped Bi2Te2.85Se0.15 compounds

초록

The n-type SbI3-doped Bi2Te2.85Se0.15 thermoelectric compounds were fabricated by the hot pressing in the temperature range of 380 to 420 ℃ under 100, 150 and 200 MPa in Ar. The transmission electron microscopy, and X-ray diffraction were used to investigate the detailed microstructure. We fabricated relatively dense compounds. The relative density of the compounds fabricated at 420 ℃ was 99.6 %. The grains of the compounds were preferentially oriented along the perpendicular to the pressing direction through the hot pressing and also the degree of preferred orientation increased with the hot pressing temperature and pressure. In addition, with increasing the hot pressing temperature, the figure of merit was increased due to the increase in density and preferred orientation. The highest figure of merit (2.35×10-3/K)was obtained at 420 ℃ under 200MPa.