Improving operation flexibility of the gas turbine through coolant intercooling and air injection using a sub-compressor

초록

The use of renewable energy, particularly solar and wind power, is increasing, but it is necessary to alleviate the variation of such resources, a key drawback of using renewable energy. In this context, gas turbines capable of fast startup and rapidly changing power following a load have attracted considerable attention. Nevertheless, enhancing the operational flexibility of gas turbines is crucial to ensure their stable operation under various conditions. Several studies have attempted to enhance the flexible operating capabilities, by examining the operational stability assurance under a variety of conditions and life cycle increases by changing the operating conditions. This paper proposes a new gas turbine configuration and operating strategy in which a sub- compressor is used to increase the ramp rate and mitigate the thermal load of the turbine blades. The performance and dynamic behavior of the novel gas turbine was simulated using an in-house program based on the gas path analysis. Specifically, a sub-compressor with an inter-cooler was used to cool the coolant from 398 degrees C to 300 degrees C, which increased the gas turbine power by 1.3 MW and efficiency by 0.4%p compared to the conventional gas turbine. In addition, when applying a new operating strategy during the ramp-up phase, a part of coolant air was injected into the combustor to suppress the maximum turbine inlet temperature by 15 degrees C compared to the conventional gas turbine. As a result, the ramp rate could be doubled (from 18.75 to 37.5 %/min) by alleviating the fluctuations of hot gas temperature in the ramp-up phase.

키워드