Powder Blasting에 의한 머시너블 세라믹의 절삭성

초록

In this study, we investigated the machinability of machinable ceramics which were developed by a research lab. of Inha Univ., Korea. The effect of the nozzle scanning times, the size of patterns and compositions of BN in ceramics on the erosion depth of samples with no mask, and samples with three different mask pattern in powder blasting of machinable ceramics. The blasting conditions were the impact angles 90°, scanning times of nozzle up to 30 and the stand-off distances 100mm. The widths of mask pattern were 0.1mm, 0.5mm and 1mm. The powder was alumina sharp particles, WA#600. The mass flow rate of powder during the erosion test was fixed constant at 150g/min and the blasting pressure of powder at 0.25Mpa Key Words : Powder blasting, Machinability, Machinable ceramics, Masking process, erosion depth