상세 보기
자료 필터
자료유형
발행연도
2018 ~ 2026
2018 2026
키워드
언어
선택된 필터
- article
- book
전체 226건 중 211번부터 220번까지의 결과를 표시합니다.
2018
Article
High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy
- Kim, Young-Kyun ;
- Joo, Yeun-Ah ;
- Kim, Hyoung Seop ;
- Lee, Kee-Ahn
- 2018-07
- Intermetallics
- ELSEVIER SCI LTD
Article
Microstructure and Room Temperature Wear Properties of a Ni-Cr-B-Si-C Coating Layer Manufactured by the Laser Cladding Process
- Kang, Tae-Hoon ;
- Kim, Kyu-Sik ;
- Park, Soon-Hong ;
- Lee, Kee-Ahn
- 2018-06
- 대한금속·재료학회지
- KOREAN INST METALS MATERIALS
Article
Effect of Carrier Gas on Microstructure and Macroscopic Properties of Tantalum Coating Layer Manufactured by Kinetic Spray Process
- Kim, Ga-Ryung ;
- Kim, Young-Kyun ;
- Kim, Hyung-Jun ;
- Lee, Kee-Ahn
- 2018-05
- 대한금속·재료학회지
- KOREAN INST METALS MATERIALS
Article
Effects of Heat Treatment on the Microstructures and High Temperature Mechanical Properties of Hypereutectic Al-14Si-Cu-Mg Alloy Manufactured by Liquid Phase Sintering Process
- Heo, Joon-Young ;
- Gwon, Jin-Han ;
- Park, Jong-Kwan ;
- Lee, Kee-Ahn
- 2018-05
- Metals and Materials International
- KOREAN INST METALS MATERIALS
Article
Microstructure and Mechanical Properties of 17-4PH Steel and Fe-Cr-B Alloy Mixed Material Manufactured Using Powder Injection Molding
- Joo, Yeun-Ah ;
- Kim, Young-Kyun ;
- Yoon, Tae-Sik ;
- Lee, Kee-Ahn
- 2018-05
- 대한금속·재료학회지
- KOREAN INST METALS MATERIALS
Article
Microstructure and High Temperature Mechanical Property of Fe-Cr-B Based Metal/Ceramic Composite Manufactured by Metal Injection Molding Process
- Lee, Kee-Ahn ;
- Gwon, Jin-Han ;
- Yoon, Tae-Sik
- 2018-03
- Metals and Materials International
- KOREAN INST METALS MATERIALS
Article
Microstructure and High Temperature Oxidation Property of Fe-Cr-B Based Metal/Ceramic Composite Manufactured by Powder Injection Molding Process
- Joo, Yeun-Ah ;
- Kim, Young-Kyun ;
- Yoon, Tae-Sik ;
- Lee, Kee-Ahn
- 2018-03
- Metals and Materials International
- KOREAN INST METALS MATERIALS
Article
산화물 분산 강화 강 분말이 첨가된 자동차 부품용 철계 복합소재의 미세조직 및 마모 특성
- 김영균 ;
- 박종관 ;
- 이기안
- 2018-02
- 한국분말재료학회지
- 한국분말재료학회
Article
Effect of Hot Isostatic Pressing on the Microstructure and Room.High Temperature Tensile Properties of Fe-Cr-Ni based HK30 Alloy Manufactured by Metal Injection Molding Process
- Kim, Young-Kyun ;
- Yoon, Tae-Sik ;
- Lee, Kee-Ahn
- 2018-02
- 대한금속·재료학회지
- KOREAN INST METALS MATERIALS
Article
Improvement in the high-temperature creep properties via heat treatment of Ti-6Al-4V alloy manufactured by selective laser melting
- Kim, Young-Kyun ;
- Park, Soon-Hong ;
- Yu, Ji-Hun ;
- AlMangour, Bandar ;
- Lee, Kee-Ahn
- 2018-02
- Materials Science and Engineering: A
- ELSEVIER SCIENCE SA