상세 보기
High Temperature Deformation Characteristics of Al-Zn-Mg Alloy Modified with CaO-Added Mg
- Lee, Gyeong-Seo;
- Lee, Ji-Woon;
- Kim, Sang-Wook;
- Son, Hyeon-Woo;
- Jung, Taek-Kyun;
- ... Hyun, Soong-Keun;
- 외 1명
Citations
WEB OF SCIENCE
2초록
Hot torsion tests were performed on an Al-Zn-Mg alloy modified with CaO-added Mg to investigate the effects of the Mg additive on the high temperature deformation characteristics. Effective stressstrain curves and processing maps were established from the experimental results under a range of deformation conditions. The fracture strain of the CaO-added Al-Zn-Mg alloy was higher than that of the Al-Zn-Mg alloy. The CaO-added Al-Zn-Mg alloy did not show an instability region in the processing map but the commercial Al-Zn-Mg alloy exhibited adiabatic shear bands at low temperatures and at a high strain rate. The results shown in this study were attributed to the reduction of the second phase by the addition of CaO-added Mg.
키워드
Al-Zn-Mg Alloy; Processing Map; Hot Torsion Test; Adiabatic Shear Band; HOT DEFORMATION; PHASE-COMPOSITION; BEHAVIOR; STEEL; MODEL
- 제목
- High Temperature Deformation Characteristics of Al-Zn-Mg Alloy Modified with CaO-Added Mg
- 저자
- Lee, Gyeong-Seo; Lee, Ji-Woon; Kim, Sang-Wook; Son, Hyeon-Woo; Jung, Taek-Kyun; Kim, Myoung-Hun; Hyun, Soong-Keun
- 발행일
- 2019-03
- 유형
- Article
- 권
- 19
- 호
- 3
- 페이지
- 1724 ~ 1728
- 언어
- ENG
- 출판사
- AMER SCIENTIFIC PUBLISHERS
- 발행국가
- 미국
- 분량
- 5 페이지
- ISSN
- E 1533-4899
P 1533-4880